AMERICAN TUFF STOCK RECYCLING MACHINERY NEW EQUIPMENT

Showing 1–12 of 17 results

  • Water Ring Hot Cut Pelletizer (ATS) NEW

    Category: AMERICAN TUFF STOCK RECYCLING MACHINERY NEW EQUIPMENT

    ITEM #: 15196Read more

    Water Ring Hot Cut Pelletizer (ATS) NEW

  • Die Face Cutter – Plastic Pelletizer (ATS) NEW

    Category: AMERICAN TUFF STOCK RECYCLING MACHINERY NEW EQUIPMENT

    ITEM #: 15135Read more

    Die Face Cutter – Plastic Pelletizer (ATS) NEW

  • Die Face Cutter Plastic Granulator (ATS) NEW

    Category: AMERICAN TUFF STOCK RECYCLING MACHINERY NEW EQUIPMENT

    ITEM #: 15132Read more

    Die Face Cutter Plastic Granulator (ATS) NEW

  • Agglomeration Pelletizer (ATD) NEW

    Category: AMERICAN TUFF STOCK RECYCLING MACHINERY NEW EQUIPMENT

    ITEM #: 15126Read more

    Agglomeration Pelletizer (ATS) NEW

  • CUMBERLAND MODEL #14 PELLETIZER

    Category: Pelletizers

    ITEM #: 14727Read more
    #14 Cumberland Pelletizer Rebuilt
    Serial No. 548507426
    15 Blades on Rotor Bolt on
    10 H.P. D.C. Motor and Drive
    Needs Top Roller and a few small parts.

  • GALA Model SLC-6 Pelletizing System

    Category: Pelletizers

    ITEM #: 14265Read more

    GALA Pelletizing System

    SLC-6 Cutting head

    in plant under power

  •  Nordson/Xaloy Water Ring Pelletizer, Model WRP-35, 3 HP Cutting Head, New in 2018

    Category: Pelletizers

    ITEM #: 13990Read more

    Nordson/Xaloy Water Ring Pelletizer, Model WRP-35, 3 HP Cutting Head, New in 2018

    • Centerline Height (Track Mounted): 36.5° – 45°
    • 120 Hole, 3 Row Die
    • 3 HP Cutter Head Motor, S/N: F1807263525
    • Baldor Reliance SuperE, Cat. No. VEM3611, 184C Frame
    • 230V/460V – 8.4A/4.2A, 1760 RPM, TEFC Enclosure
    • 37″ Long Water Bath
    • 58″ Long x 10″ Diameter Heat Exchanger
    • Max Water Temp: 122°F
    • 7.5 HP Slurry Pump, S/N: F1807133079
    • Baldor Reliance SuperE, Cat. No. EJMM3616T, 184JM Frame
    • 230V/460V – 16.8A/8.4A, 3450 RPM, TEFC Enclosure
    • 1.5 HP Circulation Pump, S/N: W1804303631
    • Baldor Reliance SuperE, Cat. No. VEM3550, 56C Frame
    • 230V/460V – 3.8A/1.9A, 3500 RPM, TEFC Enclosure
    • 42″ Tall x 10″ Diameter 2 Screen Dryer, 5 HP, Motor S/N: F2103045905
    • Baldor Reliance SuperE, Cat. No. VEM3708T, 215TC Frame
    • 230V/460V – 14.4A/7.2A, 1165 RPM, TEFC Enclosure
    • SS304 Dewatering Trough To Cool Slurry Prior To Drying
    • Temperature Control Zones: (1) 3kW Die Body Heater, (1) 1.25kW Die Plate Heater
    • Includes Refurbished Control Panel
    • System To Be Dry-Cycled Before Shipping
    • Rated For 1,800-3,500 LBS/HR Per Manufacturer
    • S/N: VP-1086
    • New In 2018
    • Approximate Cutting Head Dimensions: 46″ L x 40″ W x 70″ H
    • Approximate Water Ring Pelletizer Dimensions: 94″ L x 58″ W x 104″ H

  • GALA 5 Underwater Pelletizer w/8.1 Spin Dryer

    Category: Pelletizers

    ITEM #: 13979Read more

    GALA 5 Underwater Pelletizer w/8.1 Spin Dryer

    Gala 5 Underwater Pelletizer, With Tempered Water System Model TWS 40

    With Heat Exchanger, Watlow Water Heater, 12 Hole Die, 4 Arm Cutter Head, Comes With Waterbox and Some Piping

    8.1 Dryer, Control Panel Has Powerflex Drive For Cutting Head, Water Temp Control, Die Temp Control, With Cutter Head Amp Readout

  • Automatik/Gala Underwater Pelletizing System up to 22,000 lbs.hour – New 2010

    Category: Pelletizers

    ITEM #: 13966Read more

    Automatik / Gala model SPHERO 220 underwater pelletizing system. Unit is rated at up to 22,000 pounds per hour.  – New  2010.

    460V/3ph/60Hz operation.

    The system consists of the following components:

    A) Hydraulically actuated start up value with an 11 kW hydraulic pump.

    B) Liquid heated die plate with a Sterlco model M2B6017-L, 80 kW oil heater.

    C) A 60HP, 36 knife cutter head with a pneumatically adjustable knife shaft.

    D) A cutting chamber with a tangential water supply and pellet drain.

    E) Movitech model VSF90/4-2B water tempering system with a FUNKE model plate type heat exchanger.

    F) A 7.5HP spin dryer with an agglomerate catcher and a 1.5HP blower motor (missing the motor).

    G) A free-standing control panel.

    H) A support structure for the cutter, cutting chamber, hydraulic pump, hydraulic vale, and operator controls.

    Last used on EPS micro beads.

  • Gala SLC-6 Underwater Pelletizing System w/Control Panel

    Category: Pelletizers

    ITEM #: 13888Read more

    Gala SLC-6 Underwater Pelletizing System w/Control Panel

    SLC-6 Cutting Head (4-Blade) 5.5 HP WEG Squirrel Cage Induction Motor (SCIM) 3515 RPM, 460/3/60. 6./67A, 112M Frame

    2008 BF Spin Dryer, 12 HP Baldor <Motor, 1750 RPM Spin Dryer Rotor Speed

    Model 80 GPM TWS Tempered Water System

    With Control Panel & Assorted Sparte Parts

     

  • GALA MAP-7 Complete Pelletizing Lines (2 Available) 2012 & 2011

    Category: Classifiers

    ITEM #: 13074Read more

    FOR SALE: GALA MAP-7 COMPLETE PELETIZING LINES (TWO AVAILABLE)

    Year 2012 MAP-7  TWS 140 2016 DW

    Year 2011 MAP 7  TWS 140  2016 DW

    EACH SYSTEM WILL COME WITH ONE (1) “NEW” DIE

    FOR SALE: TWO (2) 6″ BERRINGER SLIDE PLATE HYD SCREEN CHANGERS

    FOR SALE: TWO (2) WITTE LARGE SHAKER TABLES

    Plastic Machinery of New York, Inc.

    516 766 3222 office 516 317 9731 cell

    Contact: Jeanine Jodice a1machinerysales@aol.com

    WWW.pemsinc.com

  • Gala MUP 6 Pelletizing System

    Category: Pelletizers

    ITEM #: 12831Read more

    Gala MUP 6 Pelletizing System

    Gala MUP-6 Cutting Head, 5 HP AC

    Gala 20008/BF Spin Dryer, 5 HP AC Motor

    Gala TWS-80 Tempered Water System with 8″ Dia x 36″ long heat exchanger

    5 HP Recirculation Pump

    Water Box Sighnt Glass and Die

    Conmtrol Panel – key pad for ABB Drive is misssing – will need minor work

    460/3/60  80 AMP

    Approx Dimensions:

    Cutting Head: 48″ L x 32″ w x 52″ H

    Control Panel 40″ L x 20″ w x 76″ high

    Dryer/Water System 96″ l x 48″ w x 98″ High

    Skid of parts: 48″ L x 42″ w x 24″ high