Extruders

Showing all 9 results

  • 6″ HPM EXTRUSION SHEET LINE – 1998

    Category: Extruders

    ITEM #: 11918Read more

     CINN/HPM W/6″ EXTRUDER – 1998

    Milacron  Model:  Apex 6.0 Extruder
    Condition: very good –  NEW 1998
    65″ X 24″ Cinn/HPM w/6″ Ext. 65″ X 24″ No wind or shear 1998
    Used 65″ wide Cincinnati Milacron/ HPM 1998 sheet extrusion line last used on PET at Approx 1500-1800 Lbs/Hr.
    Includes the following:
    6″ HPM extruder 30/1 L/D direct connected to a 400HP DC motor, 1750 RPM and SCR control.  Has a 21.8/1 gear reduction, Electric heated and water cooled, non vented barrel with barrel mounted temperature control panel.  Has 60″ center line height, includes a 6″ Beringer UL screen changer, and static mixer section.
    56″ flex lip sheet die feeding an 18″ x 24″ x 24″ downstack 65″ chill roll stack with free standing pumping system and base mounted operator panel. actuated roll pressure and chain driven rolls.  Has NDC thickness gauge, dip coating station and pull roll stand.Still installed and in operation as of February 2021

  • 165mm Davis Standard Thermatic Sheet Line – New 2004

    Category: Extrusion Sheet Lines

    ITEM #: 11890Read more

    165mm Davis Standard Thermatic Sheet Line – New 2004

    30:1 L/D – 32:12 – 250 HP  – Gear Box Rated for 800 HP – Vented w/Vacuum Pump – Air Cooled – Dynisco Screen Changer – Maguire Mixer – 65″ Sheetline  – Reifenhauser – Una-Dyn Auger Discharge Hopper- Sakas Cross Cut Saw – Automatic Sheet Stacker – Extrusin Sheet Die – Pull Roll Assembly

  • 3.5″ NRM PM70 24:1 WATER COOLED EXTRUDER & 3 ROLL SHEET STACK W/SHEAR

    Category: Extruders

    ITEM #: 11257Read more

    3.5″ NRM PM70 – 24:1 – WATER COOLED EXTRUDER & 3 ROLL SHEET STACK W/SHEAR

    3.5″ NRM – PM70 24:1 – water cooled Extruder

    24:1 – 75 HP AC – and AC Drive – 5 Barrel Zones – 3 Die Zones

  • Goulding 40″x 8″ Complete Sheet Line

    Category: Extrusion Sheet Lines

    ITEM #: 11221Read more
    Goulding  40”x 8” Sheet
    2.5” Air cooled Diamond America Extruder 24:1 – 50 H.P. A.C. motor and Drive.
    Hopper Dryer with Loading System.
    40” Sheet Die with Stand
    3 Roll vertical Stack 6” Top Roll  8” middle and Bottom.
    3 Spare Polish Rolls.
    Two Roll Turret Winder.
    Was used for lab work.
    Was just shut down.
    Nice Condition
  • Killion 8″ x 5″ LAB Sheet Line

    Category: Extrusion Sheet Lines

    ITEM #: 10709Read more
     8”x 5”  Killion LAB Sheet Line.
    1 H.P. D.C. Motor.
    New 1 H.P. D.C. Drive.
    Two Chrome Rolls.
    One Matt Finish Roll.
    New Bearings and Gears on Polish Rolls.
    New Bearings and sprockets on Pull Rolls.
    New Chain.
    New Air Valves and Lines.
    New Rubber on both Pull Rolls.
    New Label and Guards.
    230 Volt Single Phase.
  • Bruckner BOPP 3-Layer Line 6400mm wide w/Galileo Metallizer (unused)

    Category: Extrusion Sheet Lines

    ITEM #: 10522Read more

    Bruckner BOPP 3-Layer Line 6400mm w/Galileo Metallizer (unused)

    FANTASTIC VIDEO AVAILABLE UPON REQUEST

  • Brabender LAB Sheet Line

    Category: Extrusion Sheet Lines

    ITEM #: 8671Read more

    Brabender LAB Sheet Line

  • Yong Teng 90 mm Sheet Line

    Category: Extrusion Sheet Lines

    ITEM #: 7355Read more

    Yong Teng 90 mm Sheet Line – Complete

  • Wayne “LAB” Sheetline with 1″Wayne Extruder 251 /D 8 1/2″ wide 6″ dia. Rolls 6″

    Category: Extrusion Sheet Lines

    ITEM #: 2183Read more

    Wayne “LAB” Sheetline with 1″Wayne Extruder 251 /D 8 1/2″ wide 6″ dia. Rolls 6″ 1″ Wayne Lab Sheet Line (used only in LAB)!!!!!