Extrusion Pelletizing Lines
Showing all 8 results
-
Gamma Meccanica GM160/180 Tandem Line Compac – New 2018 – 25,000 hours
Category: Extrusion Pelletizing Lines
ITEM #: 11590Read moreGM GM160/180 Tandem Line Compac – New 2018 – 25,000 hours
- Belt conveyor with metal detector
- Gravimetric dosing system for granules (3 pieces)
- Compactor AFT 160
- Extruder GM 160/28D with bimetallic barrel and screw
- Fimic RAS 600
- Vacuum system with spaghetti and closed loop water tank
- Extruder GM 180/18D with bimetallic barrel and screw
- Fimic RAS 600
- TDA 6.0 pelletizer with heat exchangers.
- Vibrating screen
- Weighing system
- Control panels
- 400 V 50 HZ – 25,000 HOURS
-
2.5″ HPM Pelletzing Line with Gala CS40 System
Category: Extrusion Pelletizing Lines
ITEM #: 11561Read moreHPM – 2.5” Torquemaster III Extrusion Pelletizing Line
Serial number TM25III-38-78333
Gear box information: Lufkin – Size: D55-411C – Serial no. 398\AGMA rating for input speed 1750 – Ration 17.1:1 – Output RPM 99
NOTE: many screws go with it (compounding)
-
2.5″ Davis Standard Pelletizing Line w/Gala 5 SCL Underwater Pelletizer
Category: Extrusion Pelletizing Lines
ITEM #: 11246Read moreDavis-Standard Model Mark VI 25INDS25 – New 1998 – 2 1/2” extruder with air cooled barrel
– Resin Hopper
– Bunting Drawer Magnet
– Beringer Hydraulic Screen Changer
– Gala Model 5 SLC Underwater Pelletizer
– Gala Model 40/GPM Tempered Water System
– Gala Model 8.2/BF Centrifugal Dryer
-
6″Flag Pelletizing Line with Gala SLC-6 System
Category: Extruders
ITEM #: 11038Read more6” Flag Machinery (Canadian) model 60 D 24 S/N 3497, Wilson D202S gearbox 13.9:1 ratio, rated to 225HP, 24:1 L/D barrel, vented, 5 zone barrel, taken out of service 10/2021 running HIPS @ 800 pounds per hour. Water cooled cast aluminum heaters with fan blowers for cooling200HP Baldor AC 460V motor and Allen Bradley Powerflex 755 AC drive, 7 heat zone temperature control panel, Barber Coleman instruments, with slide plate screen changer, Dynisco hydraulic power pack w/accumulator, above adapted to a 2015 Gala SLC-6 pelletizer, 5HP cutter, TWS-80 cooling sytem & spin dryer complete with water box piping and control system.Flag Machinery 6” extruder panels Baldor AC motor and drive is only 3 years old. Missing one Barber Coleman temp controller.The other extra zones beyond the 7th were not used b/c the new Gala panel does it -
NGR X GRAN 165 RECYCLING LINE- New 2009
Category: Extrusion Pelletizing Lines
ITEM #: 11014Read moreNGR X GRAN 165 Recycling Line – New 2009
Material that can be processed: PE, PP, LDPE, HDPE, MDPE
-
Erema 1109 TVE Plus Eco Save Recycling Line – New 2012
Category: Erema Recycling Lines
ITEM #: 10220Read moreErema 1109 TVE Plus Eco Save Recycling Line – New 2012
Belt Conveyor – Air flush system – Additional Trox suction fan – Screen Changer SW4/170 RTF with fully automatic self cleaning system – Hot die face cutting granulator HG 154D – Additional die face for HG – Pellet dewatering screen GS 2010/350 – Heat exchanger external – Water temperature control valve – Pallets centrifugal dryer GZ 350/700 – Blower IGG20 – Cyclone
-
Cincinnati CM-92 PVC Pelletizing Line 1998
Category: Extrusion Pelletizing Lines
ITEM #: 9984Read moreComplete Gala Model 6-MSC Underwater Pelletizing Line. Running PVC at approximately1800 lbs/hr . 150 HP – Watlow Controllers – with Crammer FeederIncludes Cincinnati CM-92 counter-rotating twin screw extruderLine is complete in excellent operating condition. VIDEOS AVAILABLE UPON REQUEST -
4.5 Sterling Pelletizing Line W/WRP12V
Category: Extrusion Pelletizing Lines
ITEM #: 9522Read more4.5 Sterling Pelletizing Line with WRP 12V