Product Inventory

Blenders

Showing 49–60 of 127 results

  • Maguire WSB-940 Weigh Scale Blender – 2006

    Category: Blenders

    ITEM #: Read more

    Maguire WSB-940 Weigh Scale Blender – 2006

    4000 lbs./hr. New 2006 – 115 volts – 4-component material blender being sold as shown with the vacuum receivers and VTA stand.

  • Conair WSB-440CT Gravitmetric Batch Blender

    Category: Blenders

    ITEM #: Read more

    Conair WSB-440CT Gravimetric Batch Blender

    Conair WSB-440CT Gravimetric Batch Blender – 1450 lbs/hr. 115 volts 4 Component blender comes as shown in the photos with VTA stand and 3 vacuum receivers.

  • Vecoplan RG62/150 SPK FF Film & Fiber Single Shaft Shredder – 2009

    Category: Shredders

    ITEM #: Read more

    Vecoplan RG62/150 SPK FF Film & Fiber Shredder – New late 2009

    Film and Fiber Rotor – 15″ Diameter – 150 HP motor 480 volt with hydraulic pump to run the hydraulic ram, and Flenders Gear Box.  Special Option of Hard Face Rotor -(Rotor has cooling – but the company never needed to use it for material they were doing) low hours!   74 Cutters with 48 Nip Cutters – Shredder on 16″ high base, which can be taken off if desired. just bolts on. Complete with Control Panel, with extra holes for accessories if needed.  Outboard bearings.

    Dimensions: 180″ Long 125″ wide and 78″ High without hopper – hopper is 4o” High and top of hopper is 96″ wide x 112″ long.

    Ram Opening is 10″ deep x 63″ wide and moves along 63″ long rotor.  This is a Hard Face V-Groove Rotor and in good shape – no wear!!!

    Comes with 4 screens -1  2″ – 1 1/2″ – 3/4″ – comes with spare cutters – rails and wipers were changed.

    Comes with 20 foot long out feed conveyor – 5 feet high – and 23″ belt that flares out to 32″ wide, and 64″ wide at end where the drive is and is inclined as the shredder was on a base.

    Manuals.

  • 2 Pellet Silos 12 FT. Dia. X 36 Feet Tall

    Category: Pellet Silos

    ITEM #: 6269Read more

    2 Pellet Silos – 12′ Diameter x 36′ Tall Nominal Capacity 3050 Cu Ft. 

  • 74″ EDI Sheet Die

    Category: Dies

    ITEM #: 6258Read more

    74″ EDI Sheet Die 

  • Erema Complete Recycling Line Model 1718 TVE-DD-LF, – New 2006

    Category: Extrusion Pelletizing Lines

    ITEM #: 6178Read more

    180 mm screw dia. – double vented barrel with vacuum system.  Equipped with an Erema laser screen filter, Model LF 2/350. 400 Kw Motor & the cutter/compactor driven by a370 Kw drive.  Unit is fed with an Erema Model FB 10000/1200 incline belt conveyor with metal detector, approximately 33 feet long x 47 inches wide. (1) Erema hot die face pelletizer, (1) pellet dewatering screen, Model GS3000/2.  (1) centrifugal dryer Model GZ 500/100.

    Includes control panel with Siemens Controls. (1) 50 HP Blower. (1) rotary air lock (2) Dean centrifugal pumps, (1) Taco plate heat exchanger, (1) goulds pump (1) cyclone and misc. parts, piping and mezzanine.

  • Jordan Reduction Solutions Shredder/Hogger Model 14CSG – 400 HP

    Category: Grinders

    ITEM #: 6173Read more

    Jordan Reduction Solutions Shredder/Hogger Model 14 CSG

    400 HP motor – all steel cylinder – 30 hardened steel blades, extra blades – 20″ x 45″ feed opening, 30″ x 39″ discharge opening, 11 interchangeable screens, Chicago Blower size 15, cyclone (cone height 70″)

  • Erema 1514 TE-HG Pelletizing Line New 2005

    Category: Extrusion Pelletizing Lines

    ITEM #: 6172Read more

    EREMA 1514TE-HG 2005 Model

    Technical Specifications:

    Screw Diameter: 140 mm
    Output Capacity: 800 kg/h
    Forced Feeding:No
    Degassing System:Yes
    Heating Power (Extruder): 93.22 kW
    Heating Zones (Extruder): 6
    Type Of Die Head:Die-face
    Suitable Material Form:Film
    Type Of Screen Changer:Hydraulic

    Other Specifications:

    Suitable for processing (material): LDPE, HDPE

    Screw length : 5740 mm
    Degassing system at the barrel side
    Heating Power (extruder) : 93.22 KW ( Included Extruder barrel zones, adaptor zone, screen changer zones, pelletizing head zone)
    Heating Zones (extruder) : 6 zones of barrel + ( 1 zone in Adaptor, 3 zones on screen changer + 1 pelletizing head )
    Screen changer hydraulic operated with twin piston : SW4_170RTF_9_69217A
    Metal Detector not in working condition
    Die-head : Hot Die Face Pelletizing Head
    Number of holes : 90 holes
    Number of blades/knifes : 6
    Cutting Speed : Dependend on material
    Conveyor belt : Dimensions: Length 7300 mm x Width 1150 mm ; FB 7000_1100_9_69226A
    Grinder Type : Cutter / Compactor ; SVKPL_105358
    Type:WEG-315 ; Rating:160 KW/1480 RPM / 50 HZ / 400 V

    Shredding Motor 160kW
    Screw drive motor 250kW
    Shredding drum diameter :1500mm
    Water circulation pump
    Vibration screen
    Centrifuge
    Vacuum pump: VPUMP_V155_155_GRD_55 ; 4kW, 1435 l/min

    Pressure indicator : yes
    Variator : yes
    Water consumption : 50 M3/h
    Manuals in English
    Power installed : 1000 Amps / 415 Volts
    Power consumed 537 KW / 780 Amps

    Spares :

    1.Pelletizing die head (1pc)
    2.Clamping holder/cutter compactor (12pcs)
    3. Cutter blade/compactor (64pcs)
    4. Cutter blade/Peletizing (200pcs)
    5. Die Heater band (4pcs)
    D286xH35, 415v/1420watt
    6. Heater band barrel (5pcs)
    D230xH315, 420v/4750w
    7. Heater screen changer (6pcs)
    L430xW325, 415v/2900w
    8. Heater screen changer (9pcs)
    L455xW150, 415v/1800w
    9. Heater die joint (2pcs)
    4×160, 415v/1350w

  • Erema PC1514 TVE plus Ecosave Pelletizing Line – New 2011

    Category: Extrusion Pelletizing Lines

    ITEM #: 6171Read more

    EREMA PC1514TVEplus Ecosave 2011 Model

    Technical Specifications:

    Screw Diameter: 140 mm
    Output Capacity: 900 kg/h
    Degassing System:Yes

    Other Specifications:

    Complete line with:
    Conveyor Belt FB 7000/1100
    Metal detector
    1 Erema processing Combination type PC 1514 TVEplus
    with screen changer in front of the venting zone of the extruder
    Cutter compactor power, reinforced: 160 kW
    Cutter compactor tank diameter: 1500 mm
    Cutter compactor tank of stainless steel incl. inspection glass with light and wiper
    Extruder power, frequency controlled 200 kW
    Screw diameter 140 mm
    Effective screw length. 5320 mm
    Heating capacity cylinder: 70 kW
    Heating zones cylinder: 7
    Heating capacity adapter: 3,3 kW
    Heating zones adapter: 1
    Pump capacity at 33 mbar 60 m3/h
    Power: 4,3 kW
    Double degassing, drive 4,30 Kw1 Screen changer SW 4/250 automatic self- cleaning system
    Screen surface total: 1963 cm2
    Heating capacity: 61 kW
    Power Hydraulic unit: 7,501 Hot die face cutting granulator HG
    1 Pallet dewatering screen GS 2000/160
    Vibrating system dimensions: 1400 x 600 mm
    1 Injector type pneumatic conveyor

    Screw new in May 2018

  • 10″ Hartig Pelletizing Line – Under Power In Plant!

    Category: Extrusion Pelletizing Lines

    ITEM #: 6091Read more

    10″ Hartig Pelletizing Line – Under Power In Plant !

    10″ Hartig 600 HP with 6″ screw and vent – Beringer Hyd Screen Changer w/power pack -Beringer WRP 12 V – underwater pelletizier with 60 hole die spin dryer and water system – Gloucester Grinder 250 HP – 3 blade open rotor.  Video Availbe

  • Complete PVC Corrugated Pipe Extrusion Line

    Category: Extrusion Pipe Lines

    ITEM #: 6071Read more

    Complete PVC Corrugated Pipe Extrusion Line 12″ – 48″ 

    Capacity: from 12″ through 48″ corrugated PVC pipe

    Can do other materials with modifications.

    photos – full specs and great video shortly.

  • Cumberland 50 Granulator w/Radial Rotor 250 HP

    Category: Grinders

    ITEM #: 6066Read more

    Cumberland 50 Granulator 250 HP motor

    w 3 knife radial rotor – 250 HP (can put 100-200 HP if preferred)

    20″ x 50″ opening

    spare knives and infeed conceyor

    Ideal for wire cutting